Otvorte našu vynikajúcu bezplatnú APLIKÁCIU!
Využite exkluzívne ponuky v aplikácii.
Excelvan 2018 home mini projector 640*480p Support 1080p with Input AV/HDMI/USB/SD/YPbPr/3.5mm Audio in/DVB-T2
This LED2018 mini projector adopted the lasted upgraded LED technology, provides more brightness than ordinary LED projector with 1500 Lumens. In dark room you will enjoy sharp image. It supports projection size from 50 to 100 inches. You may enjoy large screen while protecting your eyes.
This mini projector is equipped with DVB-2 input, which means you can enjoy local TV program promptly. Its weight is only 1.35kg, which is convenient and suitable for private entertainment. It is exactly a wise choice for home theater!
100% brand new and high quality.
LED projector with1200 lumens, and a resolution of 640*480 pixels.
Projection size up to100 inches, projection distance from 1.1m to 4.0 m.
Multi-selection interface:AV/HDMI/USB/VGA/SD card/DVB-2/TV
Can support Video/USB/PC/TV
Speakers built-in projector , no need connect with any extra speakers.
Product name: Excelvan LED2018
Product model: LED2018
Display resolution: 640*480
Screen ratio: 16：9/4:3
Focusing method: Manual rotation
Projection system: Monolithic2.8 inch LCD
Keystone correction: Manual operation (perpendicularity ±15℃)
Operation mode: Remote control panel of keys
Light source:60W LED cold light source
Light Life span: 20000 hours
Power voltage: AC100-240V/50/60Hz
Brightness: 1200 lumens
Contrast ratio: 600:1
Projection Size: 50-100inches
Picture flip: vertical flip
Projection method: front/ back/ceiling
Projection distance: 1.1-4.0m
Language support: support 23 languages
Input: HDMI USB AV input VGA TV DVB-T2 SD card
Product weight: 1.35kg
1 x Projector
1 x Remote Control
1 x Power cable
1 x 1 to 3 AC extension cable
1 x User's manual
1 x AC/DC power adapter
1x Antenna Cable
1x Plastic Lens Cover
Projection dimensions and distances:
Projector screen size
Troubleshooting of simple failures
The projector does not turn on.
there is no power cable.
Plug the power adapter cable into the DC Jack and make sure that it is powered on.
Attempting to turn the projectoron again during the cooling process.
Wait until the cooling down process has completed.
Picture is blurred and image is unstable.
The connection cables are not securely connected to the projector or the signal source.
Correctly connect the cables to the appropriate terminals.
The projector lens is not correctly focused.
Adjust the focus of the lens .
The projector and the screen are not aligned properly.
Adjust the projection angle and direction as well as the height of this projector if necessary.
Auto-off after working for a while.
The projector ventilation is blocked.
Remote the obstacle.
The voltage is not stable.
Re-start the projector after the voltage is stable.
The power-heat protection system.
Re-start the projector when the cooling down process has completed.
Ineffective remote control.
Replace it with a new battery.
There is an obstacle between the projector and the remote control.
Remove the obstacle.
It is too far from the projector.
The distance from a remote control to a projector shall be no larger than 8 meters.